Agenda_webheaderFINAL.jpg

Simplifying Document Control, T&Q usability on the manufacturing shop floor

Track: Manufacturing Operations User Connection

Session Number: 170560
Date: Wed, May 10th, 2017
Time: 2:30 PM - 3:15 PM
Room: 208

Description:

CompliantPro has proved to be a valuable tool to not only ensure documents are controlled but also insure the workforce is aware of the latest revision. Acceptance however on the shop floor was waning due to the complexity of the user interface, operators found that finding and selecting the documents needed to perform their job was time consuming, a simpler solution was needed. The open architecture of CompliantPro allowed Dana to create an updated user interface using JSP to satisfy the operator’s requests this lead to greater acceptance of Document Control and Training & Qualifications.

 

Session Type: Demonstration/Tips/Tricks

Related Industry: Automotive & Transportation
Learning Objectives: 1) Reducing the time operators require to access documentation
2) Insure operators have access to the most recent documentation
3) Creating a customized interface to Off The Shelf software
Applicable Software: CompliantPro, IBS QMS
Pre-requisites: CompliantPro Document Control module
CompliantPro Training & Qualification module
ISO9000-2015 & IATF-16949 industry standards
Session Type: Demonstration/Tips/Tricks

Related Industry: Automotive & Transportation
Learning Objectives: 1) Reducing the time operators require to access documentation
2) Insure operators have access to the most recent documentation
3) Creating a customized interface to Off The Shelf software
Applicable Software: CompliantPro, IBS QMS
Pre-requisites: CompliantPro Document Control module
CompliantPro Training & Qualification module
ISO9000-2015 & IATF-16949 industry standards